 |
|
|
Door |
| Type |
|
Commercial Traffic Door |
| Model |
|
FabriCoil BASIC |
| Mount |
|
Interior |
| Size |
|
12' x 14' Maximum |
| Operation |
|
Motor Drive or Hand Chain |
| Drive |
|
Left or Right Hand |
Curtain |
| Material |
|
1-Ply PVC Fabric for Interior Use |
| Windload |
|
Not for High Negative Pressure Installations |
| Wind Beam |
|
Aluminum Extrusion Enclosed in Curtain Pocket Every 4' |
| Breakaway Tabs |
|
Min. 1/4" UHMW |
| Bottom Bar |
|
Min. 2" x 2" x 3/16" Hot Rolled; Steel Angles; Finish: Black Primer (Standard)ArmorBrite Powdercoated or Galvanized (Optional) |
| Vision Panels |
|
Clear PVC 24" High with Curtain Fabric Reinforcement |
| Color |
|
Orange or Blue (Polyurethane-Orange Only) |
Guides |
| Mounting |
|
Face (E or Z) or Jamb |
| Guide Construction |
|
Hot-Rolled Steel Angle |
| Jamb Construction |
|
Steel, Wood, Masonry or Non-masonry |
| Color/Finish |
|
Black, Galvanized or ArmorBrite Powdercoated |
Counterbalance System |
| Type |
|
Hand Chain: Torsion Spring System; Motor: N/A |
| Headplates |
|
Thickness: 3/16" |
| Barrel |
|
4" with 8" Rings and 24-Gauge Fascia |
| Bearing Plug Assembly |
|
Hand Chain: Removable on Drive End; Motor: Fixed, Welded Assembly |
Enclosures |
| Hood |
|
Type: Round or Square (Optional); Material: Steel (24 ga.) |
| Fascia |
|
Material: Steel (24 ga.) (Optional or As Required by Mount Type) |
| Headplate Cover |
|
Steel (24 ga.) (Optional) |
| Motor Cover |
|
Material: Steel (24 ga.) (Optional); Mount Type: Bracket Mount; Access Doors Available |
| Color/Finish |
|
Standard: Gray; Optional Tan, ArmorBrite Powdercoated or Galvanized |
Locks |
| Interior |
|
Dual Slide Bolts (Optional) |
| Exterior |
|
Dual Slide Bolts (Optional) |
| Interior/Exterior |
|
Dual Slide Bolts (Optional) |
Weather Seal |
| Bottom Astragal |
|
Looped Rubber Astragal Provided; Motor Operation: Optional Yellow Wireless Electric Reversing Edge |
| Guide Brush Seal |
|
2" Brush with Aluminum Retainer (Optional) |
| Header Brush Seal |
|
1-3/4" Brush with Aluminum Retainer (Optional) |
Mounting Hardware |
| Masonry Anchors |
|
3/8" or 1/2" 4-Way Expansion Shields (Optional) |
| Thru Studs |
|
3/8" x 14" or 1/2" x 14" Long Continuous Threaded Rod (Optional) |
| Crush Plates |
|
4" x 4" x 8-Gauge (Optional) |
Motor Drive |
| Type |
|
Continuous Duty; Door Speed: 17" Per Second with Hand Chain Hoist |
| Drive Mounting |
|
In Front of Barrel |
| Rating |
|
1 HP |
| Power |
|
115V or 230V, 1 Ph., 230V or 460V, 3Ph., 60Hz |
| Control Wiring |
|
24VDC Circuit |
| Control Station |
|
Provided with NEMA 1 Rated 3-Button Up/Down/Stop Functions |
| Accessories |
|
Safety Motor Interlock for Slide Bolt Locks (Optional); Radio Conrols, Other Hard Wired Controls (Optional) |
Warranty |
| Parts |
|
1 Year Materials and Workmanship |
